Product Information

---

America’s Best Hydroponics & Garden Center™ presents the Pro 360 Oxygen Pod

The Pro 360 Oxygen Pod is the first in the world, insulating and oxygenating housing that holds all 6”x 6” rockwool and Coco/Peat blocks with or without the factory plastic wrapping and eliminates algae. The Pro 360 Oxygen Pod keeps all 6”x 6” blocks elevated and level providing maximum amounts of aeration and oxygen to allow the rockwool or Coco/Peat block to dry back quicker allowing you to water/feed small amount of nutrients multiple times (1-20) per day.  When used with the Pro 360 Cap, nutrition is provided from the top down evenly, maximizing growth and boosting flower production resulting in higher crop yields with a higher quality end product.

Proudly Made in America - Patent Pending

Why the Pro 360 Oxygen Pod is needed:  

· Protective insulating and oxygenating rockwool and Coco/Peat block housing

· Improves the flow of oxygen and nutrients through the rockwool and Coco/Peat block

· Eliminates algae 360 degrees around the rockwool and Coco/Peat block

· Air prunes the roots 360 degrees and allows more root branching 

· Allows rockwool and Coco/Peat blocks to dry out quicker for more desired control of dry-backs

· Keeps 6”x 6” rockwool block from being squeezed or smashed 

· Able to remove the factory plastic wrapping allowing vital oxygen to flow 360-degrees 

· Designed at a 2-degree angle to allow all 6”x 6” rockwool and Coco/Peat blocks to sit level for even (EC) levels  

· Holds all 6”x 6” rockwool and Coco/Peat blocks level for even drainage and even (EC) levels 

· Holds the Pro 360 Cap level for even nutrient distribution and even water content (WC)

· Bug and larva deterrent reducing the need and the cost of pesticides

· Keeps all 6”x 6” rockwool and Coco/Peat blocks elevated off the grow tray for root pruning and oxygen flow

· Allows the plant to feed multiple times per day to bring rockwool or Coco/Peat block to full water capacity

· The thick-walled housing helps keep the rockwool or Coco/Peat block cooler and more aerobic

· A valuable tool for plant steering with more control of dry-backs and water content (WC)

· Sits on top of the Pro 360 Alkalinity/Water Extractor to remove stagnate water in any stage

· Less chance of root rot diseases from over watering and not being able to dry out

· The thick-walled housing helps insulate against the heat and cold in greenhouses

· High quality and built to last for professional and commercial grows

· Compliments any grow room or greenhouse

· Works with or without the 6”x 6” rockwool block factory plastic wrapping 

· The most effective and efficient way to get larger, heavier and high-quality yields 

The Pro 360 Oxygen Pod is an oxygen maximizing professional tool that gives the option to remove the factory plastic wrapping on all 6”x 6” rockwool blocks. In turn, the Pro 360 Oxygen Pod will aerate the root zone, air prune the plant’s roots, encourage root growth and root branching and improve the flow of oxygen and nutrients through the rockwool block. This will allow quicker dry-backs, keeping plants metabolizing to produce accelerated plant growth and larger crop yields with higher quality fruit through higher oxygen content.

Problem #1: Moisture created from the factory plastic wrapping on the 6”x 6” rockwool block will grow algae and encourage fungus growth from lack of vital oxygen. This can attract bugs and diseases and will slow plant growth. When the factory plastic wrapping is left on, vital oxygen is blocked from the sides. When the rockwool block is placed on a grow tray, oxygen is blocked from the bottom. When a block cover is placed on the rockwool block, oxygen is blocked from the top. Now, oxygen is blocked on all 6 sides creating low vital oxygen conditions with no control of dry-backs for plant steering and plant productivity. 

Solution #1: The Pro 360 Oxygen Pod gives the option of using the factory plastic wrapping, wiping out all of these problems and allowing vital oxygen and air to flow around all 6 sides of the rockwool block. The Pro 360 Oxygen Pod allows roots and microbes to breath in vital oxygen and be able to have aerobic respiration to keep the plant metabolizing for faster growth with less chance of root rot diseases.

Problem #2: The 6”x 6” rockwool and Coco/Peat blocks sit flat on the grow tray blocking oxygen from the bottom and they sit at an angle to drain which makes water/nutrients go to the low side of the rockwool or Coco/Peat block creating uneven water content, poor electro conductivity (EC) levels, nutrient distribution and drainage.

Solution #2: The Pro 360 Oxygen Pod keeps the 6”x 6” rockwool and Coco/Peat blocks level and elevated off of the grow tray for oxygen flow so there is no need for expensive, channeled grow trays for drainage. A simple, flat tray set at a 2 ½ degree angle is all that is needed. The Pro 360 

Oxygen Pod is designed at a 2 ½ degree angle so it sits level when placed on a grow tray at a standard 2 ½ degree angle for draining. This keeps all 6”x 6” rockwool and Coco/Peat blocks level for even nutrient distribution, drainage, water content, evaporation, and keeps (EC) levels more stable. 

Problem #3: Handling and squeezing the rockwool block damages the structure. The air pockets with oxygen that were initially present will never be restored creating root rot conditions. 

Solution #3: The Pro 360 Oxygen Pod is very easy to pick up and eliminates squeezing the rockwool block and damaging the root’s integrity. No more smashed rockwool blocks. 

Problem #4: Rockwool and Coco/Peat blocks get hot through greenhouse window glass, polycarbonate, shade cloth, horticulture lighting and natural sunlight. This creates heat stress, algae growth and low oxygen conditions to the roots making them more anaerobic.  

Solution #4: The Pro 360 Oxygen Pod is designed extra thick for insulating and oxygenating and to block out algae growth on the 6”x 6” rockwool and Coco/Peat blocks to keep them cooler and more aerobic for roots and microbes to respire. 

When the Pro 360 Oxygen Pod is used with the Pro 360 Cap and attached to the Pro 360 Water Distributor, a new automated hydroponic top-feed system and method emerges for all 6”x 6” rockwool and Coco/Peat blocks. The Pro 360 System is designed to outperform any system or method on the market by allowing nutrients to be effectively utilized for uptake to the plant through precise automation techniques. Successful automation starts with high quality precision irrigation products that are reliable and precise ultimately creating the best tools to grow the best plants possible. Made in USA Patent Pending.